That box is way too small. My cable and charger stash is at least 10 times bigger than that.

You don’t get segmentation faults if you don’t have an MMU. That can certainly make debugging more interesting when your firmware starts overwriting memory that it shouldn’t until it finally crashes.

The orange indicating gel is less toxic, but it’s still not good for you. Don’t dry any indicating silica gel in the same oven you use for food. The clear silica gel is non toxic, but breathing the dust can cause silicosis.

You can get a VPN or seedbox to avoid those letters. They are a lot cheaper than a single streaming service.

Pellet printing is usually used in larger printers. You can get much higher flow rates and the pellets are cheaper than filament. That’s good when your build volume is measured in cubic meters and you are using many kilograms of plastic in one print.

It will come down on its own eventually.

Even 7zip can compress a large text file to less than 25% of it’s original size. The installer is less than 2MB. There are even better compression algorithms for text than 7zip though.

Helium doesn’t just kill apple devices, It kills anything with a MEMS oscillator. Helium atoms are so small that it’s impossible to make a seal that completely blocks them.

On most printers, the files are either uploaded over WiFi through a web browser or transferred with a flash drive. As long as the slicer runs on your computer, you will be able to print. There are a lot of open source slicers for FDM printers than run on Linux.

Neon signs require glass blowing, this is not neon. This is a LED filament sign.

Used cars are going to get much more valuable with all the enshitified crap they keep putting in new cars.

There is potting compound with high thermal conductivity for things that produce a lot of heat. A YubiKey hardly uses any power, so heat should not be an issue.

The main downsides of potting are that it makes repair practically impossible and it can add a lot of weight if there is a large volume to be filled.

Encasing the circuit board in epoxy. It makes it very difficult to access components without destroying it. It’s also great for water proofing and increasing the mechanical robustness.

For the price they charge, they should be made so that opening the case will destroy the contents. They could have at least potted them.

I would be worried about water getting into the voids in the infill. You would probably have to fiberglass it to make it actually usable.

It doesn’t even matter if it’s a trusted seller. Amazon puts their returned items back with the new products and they stock the items from every seller together. You can have 10 sellers with a genuine item and 1 with a counterfeit item and have a chance of getting the counterfeit item from any of them because they all share the same stock.

They are commonly used with USB keystone connectors. For some reason most of them have A connectors on both sides.

I would be more worried about that fact that the AI enabled device likely needs an internet connection to function. That means the manufacturer can take away features or brick the device whenever they want to.

Sure, if you have enough data to make the cost of a tape drive worth it.

M-disc is for long term storage, which flash and hard drives are not suitable for.